Perun moto Ducati DesertX Tie-down brackets - Installation Instructions
These Tie-down brackets are designed for 'standard' Ducati DesertX (won't fit on the Rally!)
Content of the kit
- 2 x Tie-down bracket
- 4 x M8 washer - small
- 4 x M8x20 buttonhead bolt
Installation
1. Remove stock passenger foot peg brackets, by removing two bolts on each side.
2. Install Perun moto tie-down brackets according to your preference.
Brackets can face front or rear of the bike, depending on your needs.
or
Use washers and bolts from the underside. Torque to 10-12 Nm.
3. After few rides, re-torque to the spec.