Perun moto Aprilia Tuareg Tie-down brackets - Installation Instructions
These Tie-down brackets are designed for Aprilia Tuareg 660.
Content of the kit:
-
2 x Tie-down bracket
-
4 x M8 washer - small
-
4 x M8x20 buttonhead bolt
Installation
1. Remove stock passenger foot peg brackets, by removing two bolts on each side.
2. Install Perun moto tie-down brackets. Brackets are directional, narrow slot should face toward the front of the bike.
Torque the bolts to 10-12 Nm.
3. Repeat the same process on the other side.
4. After few rides check the bolts and re-torque to the spec if needed.